Harriet Martineauâ€Biography and Works

Born in 1802 in England, Harriet Martineau is considered to be one of the earliest sociologists, a self-taught expert in political economic theory  who wrote prolifically throughout her career about the relationship between politics, economics, morals, and social life. Her intellectual work was grounded in a staunchly moral perspective that was influenced by her Unitarian faith (although she would later become an atheist). She spoke out against slavery and was fiercely critical as well of the inequality and injustice faced by girls, women, and the working poor. As one of the first women journalists of the era, she also worked as a translator, speechwriter, and novelist. Her acclaimed fiction invited readers to consider the pressing social issues of the day.  She was known for her keen ability to explain complicated ideas in an easy-to-understand manner, presenting many of her theories about politics, economics, and society in the form of appealing and accessible stories. Early Life   Harriet Martineau was born in 1802 in Norwich, England. She was the sixth of eight children born to Elizabeth Rankin and Thomas Martineau. Thomas owned a textile mill, and Elizabeth was the daughter of a sugar refiner and grocer, making the family economically stable and wealthier than most British families at the time. The Martineaus were descendants of French Huguenots who fled Catholic France for Protestant England. They were practicing  Unitarians  and instilled the importance of education and critical thinking in all of their children. However, Elizabeth was also a strict believer  in traditional gender roles, so while the Martineau boys went to college, the girls did not and were expected to learn domestic work instead. This would prove to be a formative life experience for Harriet, who bucked all traditional gender expectations and wrote extensively about gender inequality. Self-Education, Intellectual Development, and Work Martineau was a voracious reader from a young age,  was well read in  Thomas Malthus  by the time she was 15, and had already become a political economist at that age, by her own recollection. She wrote and published her first written work, â€Å"On Female Education,† in 1821 as an anonymous author. This piece was a critique of her own educational experience  and how it was formally stopped when she reached adulthood. When her father’s business failed in 1829, she decided to earn a living for her family  and became a working writer. She wrote for the  Monthly Repository, a Unitarian publication, and published her first commissioned volume,  Illustrations of Political Economy, funded by publisher Charles Fox, in 1832. These illustrations were a monthly series that ran for two years, in which Martineau critiqued the politics and economic practices of the day by presenting illustrated tellings of the ideas of Malthus,  John Stuart Mill,  David Ricardo, and  Adam Smith. The series was designed as a tutorial for the general reading audience. Martineau won prizes for some of her essays, and the series sold more copies than did the work of Dickens at the time. Martineau argued that tariffs in early American society only benefited the rich and hurt the working classes both in the U.S. and in Britain. She also advocated for the Whig Poor Law reforms, which shifted assistance to the British poor from cash donations to the workhouse model. In her early years as a writer, she advocated for free market economic principles in keeping with the philosophy of Adam Smith. Later in her career, however, she advocated for government action to stem inequality and injustice, and is remembered by some as a social reformer due to her belief in the progressive evolution of society. Martineau broke with Unitarianism in 1831 and adopted the philosophical position of freethinking, whose adherents seek truth based on reason, logic, and empiricism, rather the dictates of authority figures, tradition, or religious dogma. This shift resonates with her reverence for  August Comtes positivistic sociology and her belief in progress. In 1832 Martineau moved to London, where she circulated among leading British intellectuals and writers, including Malthus, Mill,  George Eliot,  Elizabeth Barrett Browning, and Thomas Carlyle. From there she continued to write her political economy series until 1834. Travels Within the United States When the series was completed,  Martineau traveled to the U.S. to study the young nation’s political  economy and moral structure, much as  Alexis de Tocqueville  had done. While there, she became acquainted with  Transcendentalists  and abolitionists, and with those involved in education for girls and woman. She later published  Society in America,  Retrospect of Western Travel,  and  How to Observe Morals and Manners—considered her first publication based on sociological research—in which she not only criticized the state of education for women but also expressed her support for the abolition of slavery due to its immorality and economic inefficiency as well as its impact on the working classes in the U.S. and in Britain. As an abolitionist, Martineau sold embroidery in order to donate to the cause and also worked as the English correspondent for the  American Anti-Slavery Standard  through the end of the American Civil War. Contributions to Sociology Martineau’s key contribution to the field of sociology was her assertion that when studying society, one must focus on all aspects of it. She emphasized the importance of examining political, religious, and social institutions. By studying society in this way, she felt, one could deduce why inequality existed, particularly that faced by girls and women. In her writings, she brought an early feminist perspective to bear on issues such as race relations, religious life, marriage, children, and home (she herself never married or had children). Her social theoretical perspective was often focused on the moral stance of a populace and how it did or did not correspond to the social, economic, and political relations of its society. Martineau measured progress in society by three standards: the status of those who hold the least power in society, popular views of authority and autonomy, and access to resources that allow the realization of autonomy and moral action. She won numerous awards for her writing  and though controversial, was a rare example of a successful and popular working woman writer of the Victorian era. She published over 50 books and over 2,000 articles in her lifetime. Her translation into English and revision of  Auguste Comte’s  foundational sociological text,  Cours de Philosophie Positive, was received so well by readers and by Comte himself that he had Martineau’s English version translated back to French. Period of Illness and Impact on Her Work Between 1839 and 1845, Martineau became housebound due to a uterine tumor. She moved out of London to a more peaceful location for the duration of her illness. She continued to write extensively during this time but due to her recent experiences shifted her focus to medical topics. She published Life in the Sickroom, which challenged the domination/submission relationship between doctors and their patients—and was viciously criticized by the medical establishment for doing so. Travels in North Africa and the Middle East In 1846, her health restored, Martineau embarked on a tour of Egypt, Palestine, and Syria. She focused her analytic lens on religious ideas and customs and observed that religious doctrine was increasingly vague as it evolved. This led her to conclude, in her written work based on this trip—Eastern Life, Present and Past—that humanity was evolving toward atheism, which she framed as rational, positivist progress. The atheistic nature of her later writing, as well as her advocacy for mesmerism, which she believed cured her tumor and the other ailments she had suffered, caused deep divisions between her and some of her friends. Later Years and Death In her later years, Martineau contributed to the Daily News and the radical leftist Westminster Review. She remained politically active, advocating for women’s rights during the 1850s and 60s. She supported the Married Women’s Property Bill, the licensing of prostitution and legal regulation of customers, and women’s suffrage. She died in 1876 near Ambleside, Westmorland, in England, and her autobiography was published posthumously in 1877. Martineaus Legacy Martineau’s sweeping contributions to social thought are more often than not overlooked within the canon of classical sociological theory, though her work was widely lauded in its day, and preceded that of  Ãƒâ€°mile Durkheim  and  Max Weber. Founded in 1994 by Unitarians in Norwich and with support from Manchester College, Oxford, The Martineau Society in England holds an annual conference in her honor. Much of her written work is in the public domain and available for free at the Online Library of Liberty, and many of her letters are available  to the public via the British National Archives. Selected Bibliography Illustrations of Taxation, 5 volumes, published by Charles Fox, 1832-4Illustrations of Political Economy, 9 volumes, published by Charles Fox, 1832-4Society in America, 3 volumes, Saunders and Otley, 1837Retrospect of Western Travel, Saunders and Otley, 1838How to Observe Morals and Manners, Charles Knights and Co., 1838Deerbrook, London, 1839Life in the Sickroom, 1844Eastern Life, Present and Past, 3 volumes, Edward Moxon, 1848Household Education, 1848The Positive Philosophy of Auguste Comte, 2 volumes, 1853Harriet Martineau’s Autobiography, 2 volumes, posthumous publication, 1877

Session 2_Ethical Dilemma_No Show Consultant Essay

Session 2_Ethical Dilemma_No Show Consultant Ethical Dilemma Case Jeffrey Moses was facing one of the toughest decisions of his short career as a manager with International Consulting. Andrew Carpenter, one of his best consultants, was in trouble because of family issues, and his problems were affecting his work. International Consulting designs, installs and implement complex back-office software systems for companies worldwide. About half of consultants including Carpenter, work primarily at home. Carpenter as a consultants is good at his work, knowledgeable, high level of skill and his willingness to travel is hard to find. However, there have been numerous occasions and reports where Carpenter was unprofessional and absent in†¦show more content†¦Demanded a 50% deduction of the consultant’s fee but still wants him to finish the job rather than replacing Carpenter for them. Moral Agent Jeffrey Moses – As Carpenter’s manager is caught whether or not to dismiss Carpenter for this recent irresponsible act or give him another chance. Options to Resolve Ethical Dilemma 1). Give Carpenter a month’s notice and dismiss him. He is a good consultant so he won’t have any trouble finding a new job, and you’ll avoid any further problems associated with Carpenter’s emotional difficulties and alcohol problems. 2). Let it slide. Missing the New York appointment is Carpenter’s first big mistake. He says he is getting things under control, and you believe he should be given a chance to get himself back on track. 3). Insist Carpenter to take a paid short leave and pull himself up back to form. Get counseling and advises on personal aspect. If the abuse continues require him to get professional help or dismiss him. Alternative Course of Action I will let Carpenter finish his work with the major New York Company and make sure he is guided accordingly by his team leader or another colleague in accomplishing his tasks and deliverables. The guidance Carpenter will get can be simple calls and daily huddle on project status and updates. Make sure he is committed 100% on the tasks and busy all the time. This will make

Personal Goals Essay Paper Example For Students

Personal Goals Essay Paper As a student at the University of Phoenix three personal goals that I want to achieve are, first is to complete my bachelor of science in business management in 2 years. Next is to become a better writer. Throughout junior college, writing has always been my weakest point and with the amount of writing assignments required at University of Phoenix this needs to be one of my top goals. Finally is to complete every course with no less than a B letter grade. With making the decision to return to school and taking on the considerable financial burden, receiving an average grade would be unacceptable to my standards. While being employed full-time, The University of Phoenix has the rare opportunity for working professionals to finish courses in just 5 weeks. Having such a compressed time schedule for completing degrees will make it possible to complete my bachelor of science in business management in 2 years as long as I do not deviate from the program. I have decided that my number one priority in life is to complete my degree. I do not have other major commitments outside of work that will distract me from my assignments so staying focused on school will be realistic. Though I cannot predict the future, I do not plan on taking any time off during the two years that would result in interrupting my class schedule. With the option of taking CLEP test this will allow me to test out of some of the lower-division courses such as communication arts and humanities. Although this will require additional studying outside of my upper-division courses the CLEP test can help eliminate additional courses nee ded to be taken, so I can stay on track of my 2 year goal. Writing papers has never been my strongest asset throughout school. I always found myself only writing what was required of me but never trying to improve my writing skills on my own time. In junior college the majority of my classes were math and science with a major in Administration of Justice. The only writing that I had to do was case briefs, which was based on legal research, which did not require any creativity, brainstorming and writing skills, just citing the facts and decisions in a proper format. To become a better writer it will take self-discipline and dedication. Because writing is my weakest point, submitting quality papers will require the most amount of my time by doing research and proofreading. I will need to use the resources available to me to proofread and receive constructive criticism on my papers. Such resources may include the Center for Writing Excellence made available to University of Phoenix students which has two ways of submitting papers for review. On e is through WritePoint which is an automated service and could have a response within minutes. The other is through Tutor Review which is where someone reads the first 4 pages of a paper and responds within 48 to 72 hours. Other resources could be instructors who offer to proofread papers before the due date and even fellow team members. While staying on schedule with my degree I want to complete each course with no less than a B letter grade. Completing the B.S. in business management at the University of Phoenix is a financial commitment, and to get the most out of it is setting a high standard of academic accomplishment. The most important way for me to achieve this is not to procrastinate. I will set time aside that is dedicated to studying and completing assignments. This will include but not be limited to a minimum of two hours a day, other than Thursday which is the night of class, and additional time on weekends when needed. I will review which assignments are due prior to the next class meeting and set deadlines for those assignments including learning team assignments. A good portion of the academic grade at the University of Phoenix is based upon learning team assignments, so I will do my part on not being a burden on my team members and help whoever is in need of it. I will complete the individual assignm ents by the deadline determined by my team members and at the quality expected as well. And make sure to communicate any issues that I may have with any team members within the group or completing my portion of the assignments on time. .u00cea6d85429000601594dbd457ad1cc , .u00cea6d85429000601594dbd457ad1cc .postImageUrl , .u00cea6d85429000601594dbd457ad1cc .centered-text-area { min-height: 80px; position: relative; } .u00cea6d85429000601594dbd457ad1cc , .u00cea6d85429000601594dbd457ad1cc:hover , .u00cea6d85429000601594dbd457ad1cc:visited , .u00cea6d85429000601594dbd457ad1cc:active { border:0!important; } .u00cea6d85429000601594dbd457ad1cc .clearfix:after { content: ""; display: table; clear: both; } .u00cea6d85429000601594dbd457ad1cc { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u00cea6d85429000601594dbd457ad1cc:active , .u00cea6d85429000601594dbd457ad1cc:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u00cea6d85429000601594dbd457ad1cc .centered-text-area { width: 100%; position: relative ; } .u00cea6d85429000601594dbd457ad1cc .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u00cea6d85429000601594dbd457ad1cc .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u00cea6d85429000601594dbd457ad1cc .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u00cea6d85429000601594dbd457ad1cc:hover .ctaButton { background-color: #34495E!important; } .u00cea6d85429000601594dbd457ad1cc .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u00cea6d85429000601594dbd457ad1cc .u00cea6d85429000601594dbd457ad1cc-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u00cea6d85429000601594dbd457ad1cc:after { content: ""; display: block; clear: both; } READ: Racism The sizzling streams of sunlight were just EssayTo achieve the above goals they all share the same core of ideas, self-discipline and dedication. I have set my mind on going back to school and completing it all the way this time. I believe if I stick to my goals that being a student at University of Phoenix will be a pleasurable and successful experience, so much so that I will want to continue to get my MBA.

Odysseus Characterization Paper free essay sample

In The Odyssey, the protagonist is a leader named Odysseus who goes on a journey with his crew to get back home to Ithaka from Troy, after the trojan war. In the epic poem, The Odyssey, the poet Homer, suggests that Odysseus is a superior leader which is revealed by Odysseuss, bravery, intelligence, and perseverance. Odysseuss bravery sets himself apart from other leaders. Odysseus has to display an example to his crew by inspiring them with his fearlessness. Odysseus illustrates his grit when he forces his crew to carry on with going to the underworld: â€Å"We must go/ to the cold homes of death and pale Persephone/ to hear Teiresias tell of time to come/ They felt so stricken, upon hearing this, / they sat down wailing loud, and tore their hair/But nothing came of giving way to grief/ Down to the shore the ship at last we went. We will write a custom essay sample on Odysseus Characterization Paper or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page † Homer 10. 623-625 . Odysseus showcases his hardiness when his crew does not want to go to the Underworld, but Odysseus presses on, while knowing that lost and terrifying souls await him. Odysseus’s fortitude spreads throughout his crew, if he is scared, his followers also feel fear. Without courage the team can not get home to Ithaka. In order to achieve his goal, the Odysseus needs to speak with Teiresias. Also Odysseus displays his fearlessness when he is trapped in the Kyklopss cave: â€Å"’Now, by the gods, I drove my big hand spike/ deep in the embers, charring it again,/ and cheered my men along with battle talk/ to keep their courage up: no quitting now/†(Homer 9. 06-409) . Odysseus exhibited superb pluck when executing his plan of blinding the Kyklops Had Odysseus not led his people by bravely heading the attack, his words would have meant nothing to the crew. For a leader to be â€Å"brave† he does not only have to be able do the impossible by himself, but he must also influence the people around him to continue on by his side. To be an epic leader intelligence is necessary. One can be brave, but without wit his courage may result in a poor decision. Odysseus uses his intellect to strategically send only three members of his crew to explore the land of the lotuss: â€Å"then I sent two picked men and a runner to learn what race of men that land sustained† (Homer 9. 96-97). Odysseus knows that is the inhabitants are hostile he can lose his entire team, but this way he potentially risks only a fraction of his men. Decisions made by a leader without acuity are futile and may prove harmful to his constituents. Furthermore, Odysseus exemplifies his intelligence when instead of mindlessly slaughtering the suitors, he creates a plan to overcome the fact that he is outnumbered: â€Å"’Put aside two broadswords and two spears/ for our own to use, two oxhide shields nearby/ when we go into action. Pallas Athena, and Zeus All Provident will see you through, bemusing our young friends† (Homer 16. 352-358). Odysseus comes up with the plan to prepare weaponry for himself to ensure he had enough to destroy the suitors, while at the same time making sure the suitors do not acquire arms themselves. Although Odysseus wants to annihilate the suitors he keeps his motives in sight and manages to formulate the plan. The analytical ability to act in a difficult situation is essential for a good leader because the environment is ever changing and sometimes rapid decisions must be made. In the end Odysseuss scheme succeeds to provide arms for him and his accomplices, but the suitors are still able to gain weapons. Without perspicacity strength and bravery are nothing. What sets Odysseus apart from other Greek heroes is that he prefers to fight with his brain rather than with his brawn. Odysseuss reason also helps him make up for the fact that unlike the other Greek heroes, he does not have immortality. Lastly, Odysseuss perseverance made it possible for him to finally make it home to Ithaka, his persistence effects his crew which looks up to him for guidance. When Odysseus arrives home he describes what he had to endure to his wife Penelope: â€Å"’My lady, / what ordeals have we not endured! Here, waiting/ you had your grief, while my return dragged out-/ my hard adventures, pitting myself against/ the god’s will†¦ But now our life resumes: we’ve come together to our longed-for-bed†Ã¢â‚¬â„¢ (Homer 23. 394-400). Both Odysseus and his wife have to cope with many challenges throughout Odysseuss 20 year absence. Even after his crew perished and he is left shipless, Odysseus does not give up. Likewise, when Odysseus has to sacrifice his men in a fight against Skylla, he grieves for his loss but he understands that he must push on : â€Å"Now I let go with hands and feet, plunging/ straight into the foam beside the timbers, /pulled astride, /and rowed hard with my hands/ to pass by Skylla†Ã¢â‚¬â„¢ (Homer 9. 564-568). Odysseus is forced overboard into the raging ocean, but he continues to hope. After losing his crew and his ship Odysseus never sets the sight of his goal to reach home. If Odysseus gives up when the gods throw everything they have at him, his quest is impossible. Instead of cowering from his fears, Odysseus attacks them head on, thus proving he will not surrender to challenges until his final destination is reached. Due to his bravery, his intelligence, and his perseverance, Odysseus is depicted as a phenomenal leader in the epic poem The Odyssey. Odysseuss courage in the Kyklopss cave makes it possible for him and his crew to escape the beast. Without Odysseuss acumen it would be impossible for him to surpass the many suitors that ravaged his home. Most importantly, Odysseus carries on when all odds are against him. Without his dedication Odysseus would not be able to bypass the formidable monsters that block his path back home. Many modern leaders can take Odysseuss example; for instance, modern day politicians need to endure when tackling challenges that at times may seem unbeatable. The only way to try to make the world a better place is to solve monumental problems that affect out everyday lives, such as unemployment and conservation of our environment. We, the human race as a whole, are Odysseus and we need to challenge the Polyphemus, which the modern problems of our world.

Information System Processes in Wal

Introduction Wal-Mart Company, which was opened by Sam Walton in 1962, is among the largest retail stores in the world. Walton opened it to sell products at reduced prices in order to give customers an opportunity to save money and use it to improve their lives. The company was therefore started as a small discount store.Advertising We will write a custom assessment sample on Information System Processes in Wal-Mart Company specifically for you for only $16.05 $11/page Learn More Wal-Mart was committed to satisfying the needs of its customers by serving them in a friendly manner and offering them low prices. Until today, the company maintains its initial commitment to serve its customers. The company’s shares started trading at the New York Stock Exchange in 1972 (McKeefery 3). Currently, Wal-Mart has more than 9600 retail outlets that are spread in different countries and a total of 2.1 million workers. Most of them are based in the United States . General Explanation of Wal-Mart’s Business Process Wal-Mart has limited competitors because it has been able to establish a big business empire. It operates about 700 discount stores in the United States and 2900 supercenters, which stock groceries. In addition, it has smaller format stores that have been growing fast. The company has stores that perform well in Canada and Mexico and runs its activities in several Asian countries (Organizational Structure 6). Wal-Mart’s use of Information Systems Wal-Mart is among business organizations that have been able to implement information systems successfully. The company’s information systems aim at centralizing its operations in order to develop common practices, which can be applied in its stores around the world. All business activities carried out by Wal-Mart use technology. For instance, technology is applied to keep records of inventories from suppliers and maintain a good relationship with customers, which att racts and retains them. Application of information systems has benefited Wal-Mart since it has enabled the company to maintain its status as a leader in the market. One of the most important information systems that Wal-Mart applies is bar code system. The company is among organizations that successfully organize data gathered from different places into meaningful information.Advertising Looking for assessment on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More The data, which are gathered from bar codes, are used to monitor sales. Wal-Mart has access to information on product sales such as the type of products purchased and their prices price. This is combined with advanced telecommunications to facilitate transfer of information between different branches and the centralized system. This enables Wal-Mart to sustain a real-time database equipped with adequate data on company transactions. Radio frequency identification, c ommonly referred to as RFID is another information system that is used by Wal-Mart. This is a technology that uses small tags, which contain microchips with data on particular items. The technology transmits radio signals along short distances. The signals are received by RFID readers, which pass the data to computers for processing. RFID tags are easy to work with hence the company is able to access information that is used to identify different products (Wal-Mart stores Inc 5). This type of information system enables Wal-Mart to increase its effectiveness in terms of inventory control and management of supply chains. The company can track its products along supply chains (Laudon Jane 45). Wal-Mart is also credited with the introduction of self-check-out lanes. Since the company serves many customers at the same time, sometimes, they are forced to queue for many hours. This information system makes it easy for customers to move in and out of the company’s premises without d ifficulties. Wal-Mart Information System Processes Ways through which Information Systems would Improve Wal-Mart Processes Information systems would bring numerous benefits to Wal-Mart since advancements in technology have compelled companies to embrace the concept in order to serve their customers better. Information systems would enable Wal-Mart to reduce costs and increase profits. For instance, RFID would enable the company to monitor its supply chains (Wailgum 5).Advertising We will write a custom assessment sample on Information System Processes in Wal-Mart Company specifically for you for only $16.05 $11/page Learn More This would eliminate possible losses that occur due to a lack of proper tracking of different processes. Information systems would also ensure that both customers and the company’s employees do not waste a lot of time. For instance, self-check-out lanes would facilitate entry and exit of customers into the company’s premises. Without this system, customers would be required to queue for many hours. However, this problem would be solved through the use of information systems. Suggestion for Improvement Wal-Mart should take several measures in order to improve service delivery. The first thing that the company should do is to redefine the RFID mandate by restricting it to products that do not have high amounts of liquid and metal. This would give vendors and suppliers enough time to confirm reliability of tags for all products. The company should use its powerful nature to develop a buying consortium. Wal-Mart should also endeavor to ensure that its customers are aware of different information systems that the company uses. This would ensure that its investment in information systems is utilized accordingly. Works Cited Laudon, Kenneth, L. Jane. Managing information systems-managing the digital firm. Upper Saddle River, NJ: Pearson Prentice Hall, 2010. Print. McKeefery, Kevin. Wal-Mart restruct ures to boost e-commerce. 2010. Web. Organizational structure 2011. Web.Advertising Looking for assessment on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Wailgum, Thomas. 45 years of Wal-Mart history: a technology time line. 2007. Web. Wal-Mart stores Inc. 2011. Web. This assessment on Information System Processes in Wal-Mart Company was written and submitted by user Greyson R. to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Pyrrhic Victory - Origin of the Term

Pyrrhic Victory - Origin of the Term A Pyrrhic victory is a type of win that actually inflicts so much destruction on the victorious side that it is basically tantamount to defeat. A side that wins a Pyrrhic victory is considered ultimately victorious, but the tolls suffered, and the future impact those tolls, work to negate the feeling of actual achievement. This is sometimes referred to as a ‘hollow victory’. Examples: For instance, in the world of sports, if team A defeats team B in a regular season game, but team A loses its best player to a season-ending injury during the game, that would be considered a Pyrrhic victory. Team A won the current contest, however losing their best player for the remainder of the season would take away from any actual feeling of accomplishment or achievement that the team would typically feel after a victory. Another example could be drawn from the battlefield. If side A defeats side B in a particular battle, but loses a high number of its forces in the battle, that would be considered a Pyrrhic victory. Yes, side A won the particular battle, but the casualties suffered will have severe negative effects from Side A going forward, detracting from the overall feeling of victory. This situation is commonly referred to as â€Å"winning the battle but losing the war.† Origin The phrase Pyrrhic victory originates from King Pyrrhus of Epirus, who in 281 B.C., suffered the original Pyrrhic victory. King Pyrrhus landed on the southern Italian shore with twenty elephants and 25,000-30,000 soldiers ready to defend their fellow Greek speakers (in Tarentum of Magna Graecia) against advancing Roman domination. Pyrrhus won the first two battles that he participated in upon arrival on the southern Italian shore (at Heraclea in 280 BC and at Asculum in 279 BC). However, throughout the course of those two battles, he lost a very high number of his soldiers. With his numbers cut drastically, King Pyrrhus’s army became too thin to last, and they eventually ended up losing the war. In both of his victories over the Romans, the Roman side suffered more casualties than Pyrrhus’ side did. But, the Romans also had a much larger army to work with, and thus their casualties meant less to them than Pyrrhus’s did to his side. The term Pyrrhic victory comes from these devastating battles. Greek historian Plutarch described King Pyrrhus’s victory over the Romans in his Life of Pyrrhus: â€Å"The armies separated; and, it is said, Pyrrhus replied to one that gave him joy of his victory that one other such victory would utterly undo him. For he had lost a great part of the forces he brought with him, and almost all his particular friends and principal commanders; there were no others there to make recruits, and he found the confederates in Italy backward. On the other hand, as from a fountain continually flowing out of the city, the Roman camp was quickly and plentifully filled up with fresh men, not at all abating in courage for the loss they sustained, but even from their very anger gaining new force and resolution to go on with the war.†

CRJS472IP5 Research Paper Example | Topics and Well Written Essays - 750 words

CRJS472IP5 - Research Paper Example l in the world containing information about more than 70 million criminals along with over 34 million civil prints (The Federal Bureau of Investigation, 2010). This paper discusses the reasons as why the integrated automated fingerprint information system works so well and the measures that are necessary to ensure the effectiveness of new and emerging biometric databases. The Integrated automated fingerprint information system features the fundamental practices for fingerprint biometrics including maximizing the quality of a fingerprint scan, ensuring liveness detection to prevent circumvention, measuring system performance and conducting scenario testing. The quality of the fingerprint scan is a vital aspect of the fingerprint biometric system design and is determined by the scanner resolution, scanner measurement area, scanner measurement technology, and the human and environmental factors. High quality fingerprint scans yield large numbers of biometric features. Fingerprint copies may be used in attempts to bypass the biometric system. The Federal bureau of Investigation prevents security bypasses by maintaining liveness detection in the integrated automated fingerprint information system. Liveness detection also referred to as copy protection ensures that copies of authorized user fingerprints are not used in the biometric system. Fingerprint copies include activated latent prints, two-dimensional and three-dimensional copies. The automated fingerprint information system features scanners with a built-in ability to detect latent, two-dimensional and three-dimensional copies. The Integrated automated fingerprint information system architecture complies with the Federal Bureau of Investigation architecture. And also regular reviews are conducted to ensure it complies with standards and guidance. The regular reviews ensure that the integrated automated fingerprint information system works with exceptional performance. The system also features service-oriented

History - Malthusian Demographics Essay Example | Topics and Well Written Essays - 750 words

History - Malthusian Demographics - Essay Example This he said will be due to the fact that resources will no longer be able to sustain the expanded population (Elwell 133). For the balance of the population and the resources to be reached, Malthus proposed certain natural calamities to be vital in this; he said that countries going to war and mass killing being realized were one way of reducing the enormous number of the population that was creating tension on the limited available resources. He also proposed other natural catastrophes like volcanic eruption to be helpful in the checking the population growth rate. The Malthus prediction can be said to have failed since its inception, but that is not all, the problem facing the developing countries currently will certainly lead to the population explosion (Ehrlich, Paul, and Anne 156). In the developing countries, there are massive and unchecked population growth while in the same time the recourses created can not support the population. The rate of population growth in the develo ping countries has immensely contributed to the widespread abject poverty in the region. Even without directly experiencing Malthus projection we can say that the effect of unchecked population is impacting negatively in some parts of the world. One of the salient features of the high population growth rate is the cause of political instability in the countries that are victims of these. In the third world countries, resource distribution is acutely skewed towards the a few individuals that wield political power and have great influence in the country and can marshal resources in their favor to lead opulence life while their subjects are surviving from hand to mouth (Smith 199). This has led to public outcry and has in some unfortunate circumstances led to mass actions in a bid to topple and impeach the existing government for not caring about the common man. It has also led to the formation of the insurgents who antagonizes the government creating political instability. Malthus pro posal may not be realized today but in other ways it can be seen as having come to reality. Haphazard population increase has led reduce wages in the work environment and this has perpetuated poverty in such areas. The relationship between population increase and poverty is very imminent in light of scramble for the few opportunities available. Increase in population numbers provides alternatives manpower since there is more supply than demand and this can only work on reducing the wages of the workers (Malthus 112). The state of population explosion can also lead to high level of unemployment and this impact negatively on the younger generation in which the youths are involved in the law breaking due to frustration a situation refereed to as juvenile delinquency. In his publication ‘Additions to an essay on the principle of population’, Malthus intrinsically evaluated the connection between the global population increase and employment opportunities vis a vis wages com pensation (Malthus 213). In regard to this he did made a hypothesis that the increase in the world population will catalyze poverty introduction as well as low income through wages to the workers. This is because of the readily available workforce. This came to be widely known as ‘The Iron Law of Wages’ (Malthus 246). The exponential population incr

The Capital Budgeting Method Term Paper Example | Topics and Well Written Essays - 1500 words

The Capital Budgeting Method - Term Paper Example It should be noted that in the assessment of the profitability of an investment, it is also important to consider the timing of cash inflows. The rationale behind this is expressed in the concept of the time value of money which is widely recognized as one of the single most important concepts in financial analysis. This tells us that a dollar to be paid today has a higher value than any dollar to be paid tomorrow. Holding a dollar has an opportunity cost in terms of interest.   Thus, a dollar invested today can be turned into $1.10 next year when lent at 10% interest. In the same way, a dollar collected today will be used by a company to be invested in its profitable undertakings which can yield more dollars in the future. Thus, it can be deduced that investments which generate more cash earlier in their lives are more profitable. This might sound consistent with the payback period. However, it should be noted that NPV takes into account the total cash flow generated by the invest ment and does not stop when the total investment is recouped.          NPV, unlike the payback period, recognizes the importance of a company’s present return on investment. It should be noted that when the company calculates the return on investment using NPV, it measures the cash flow based on the cost of capital. The payback period, on the other hand, only looks at the earliest possible time the investment is recouped and not at the investments meeting the standard of the company.               A typical business organization extends credit to the customer for various reasons. It is often uncommon to find a company which collects the totality of payment for its products and services in cash.   It should be noted that extending credit exposes a business entity to risks of default. Unlike cash which ensures the full and ready payment of the company’s goods and services, credit only gives the customer an obligation. With credit, customers have the right to default for any reason. This leaves companies with receivables which be accounted for as bad debts and can be readily written off.

Silicon Solar Cell Grid And Bus Bar Design Engineering Essay

Silicon Solar Cell Grid And Bus Bar Design Engineering Essay In this paper, we shall be designing and explaining the process for fabricating the top grid and busbar electrodes for a crystalline silicon solar cell using commercial processing techniques, such as screen-printing. The solar cell must be kept at a minimum of 20.8% conversion efficiency and we must keep our power losses under 8% using commercially available technology and inks. INTRODUCTION Solar cell technology is a rapidly growing form of power generation. There are new and improved processes being developed and understood all the time. In this paper, we will introduce, design, and calculate the properties and a process of fabricating a crystalline silicon solar cell. A solar cell is an electronic device that converts sunlight into electricity, using what is known as the photovoltaic effect. The photovoltaic effect is the basic physical process in which a PV cell converts sunlight into energy. The sunlight, containing photons, strikes the PV cell and are either reflected or absorbed. When the PV cell absorbs a photon with an adequate energy level, an electron is excited to the conduction band, which produces a hole in the valence band. Once the electron-hole pair is formed, the built-in electric field separates the electron from the hole and then the two charges can contribute to current flow in the PV cell. Once this hole is formed a built-in electric field is needed to drive the current to an external load, assuming one is connected. The built in electric field is a property of the PV cell consisting of an n-type (negative) and a p-type (positive) semiconductor formed together. When these two materials, normally positively or negatively doped silicon, are together, they create a pathway for excess electrons in the n-type material to flow to the p-type material. This causes the holes to flow into the n-type material from the p-type material. Through this process of electron and hole flow, the electric field is created and needed to force the electrons to jump to the surface in order to become available for use in the electrical circuit as shown below in figure 1. [1] With light, charge imbalance, generates voltage across terminals No voltage across diode, No Current Load connected, Current flows Figure 1: Different stages of PV cell [2]. Problem: Our job was to design grids and busbars, outline a fabrication process for putting down the grids and busbars on top of the crystalline silicon solar cell using commercial printing inks for making ohmic contacts, and describe the commercial processing techniques we are using, such as screen-printing. Our initial constraints are that the silicon solar cell is a square such that its dimensions are 10cm by 10cm. Also, the cell is such that, when there are no resistive or grid-shadowing losses, it produces a current density of 40 mA/cm2. The cell also produces a voltage of 0.65 V, a fill factor of 80% and an energy conversion efficiency of 20.8%. We are assuming that the sheet resistance of the p layer is 100 ohms/square. We also must calculate the shadowing loss due to the blocked sunlight from the grids and the busbar on the solar cell. In addition to those losses, we must take into account the resistive losses in the top junction layer with the cells sheet resistance, grids and busbar s. While fabricating this solar cell, the losses are to be minimized such that the sum is to be less than 8%. MATHEMATICAL DERIVATIONS In this section the mathematical equations for calculating various losses in the solar cell will be derived. Below in table 1 is the design parameters and constraints given for this solar cell. Parameters given in the design project specifications Parameter Value Description Light-generated current density Open-circuit voltage Fill factor Energy conversion efficiency Sheet resistance of the p-layer Area of the solar cell Table 1: Design parameters for solar cell Using the parameters given above, the optical power incident on the solar cell is given by manipulating the equation into the form which gives . The power generated by the cell is given by . The voltage at the maximum power point Vm is determined by using the following equation: [2]. Using this value of Vm, the current at the maximum power point Im was then determined with the following equation: The losses in the solar cell are caused by resistance in the bus bar, resistance in the fingers, resistance in the base and emitter layers, and shadowing by the bus bar and fingers. The resistivity per square of the ink used in this cell is measured at 25 µm thick [5]. The resistivity of the ink is then calculated by . A MATLAB program was written to help determine the optimum spacing between the fingers of the solar cell. The code that was written can be seen in the back of this paper located in the appendix. The graph generated by the program is in figure 2. C:UsersGenDocumentsEE 332Final ProjectFinger Spacing Chart.png Figure 2: Total Power Loss versus Finger Spacing. From the graph we determined the optimal spacing between fingers to be 2.5mm. The power lost in each finger is given by where Lf is the length of the finger, Sf is the spacing between fingers, à Ã‚ f is the resistivity of the finger, wf is the width of the finger, and df is the height of the finger. A summary of the design parameters used here are shown in Table 2. Once the power lost in each finger is known, the total resistive losses in the fingers can be calculated by multiplying by the number of fingers . The power loss in the bus bar is calculated by where Lb is the length of the bus bar, à Ã‚ b is the resistivity of the bus bar, wb is the width of the bus bar, and db is the height of the bus bar. The power loss in the emitter of the solar cell is calculated by where à Ã‚ em is the resistance per square of the emitter. There are losses due to shadowing of the solar cell caused by the fingers and bus bar blocking light. The shadowing losses is calculated by where Nb is the number of bus bars. The total power losses in the solar cell is then calculated by . We can then determine the percentage of power losses to be which is below the 8% loss specified for this design project. CELL FABRICATION TECHNOLOGIES Cell Fabrication: When it comes to fabrication techniques of solar cells there are a few techniques to pick from. These choices mainly consist of screen printed solar cells, buried contact solar cells, high efficiency solar cells, and rear contact solar cells. For the purpose of this paper the method of choice that will be used is screen printing. The screen printing process can be a cheaper process and is often comprised of fewer steps than other methods. Screen printing has been around for quite some time, though originally designed for printing graphics, advertisements, flyers, etc.; one of these screen printing machines can be seen in figure 2. http://www.phoseon.com/img/Screen_Print_iStock_000008690558XSmall.jpg Figure 2: One of the arms of a machine that holds a screen, squeegee, and ink. [3] As far as the physical screen printing portion of semiconducting devices or in our case a solar cell it is a pretty simple idea. A screen is created in the form of a negative just as film in a camera. Certain areas of the screen allow ink to pass through and others do not. This screen can be made of different materials such as silk, metal, plastics. The screen is used to hold the ink that will be transferred to the target object, in this particular scenario a wafer of crystalline silicon or c-Si. Saw damage etch: After the blocks of silicon are cut into wafers, roughly .5mm thick, the saw leaves behind a residue that was used as a coolant during the cutting process. [2] The wafers get loaded into cassettes so that they can be cleaned as show in figure 3. The wafers are then cleaned in a hot sodium hydroxide bath to remove the contamination left behind. This process removes the first 10 micrometers of silicon which was damaged during the cutting process. Once this has taken place the silicon is then placed into another, more diluted, sodium hydroxide bath which has been mixed with isopropanol as a wetting agent to etch the surface of the silicon wafers. This process gives a very uniform etch rate when c-Si wafers are used as the primary substrate. http://www.pveducation.org/sites/default/files/PVCDROM/Manufacturing/Images/MVC-420F.JPG Figure 3: Multicrystalline silicon wafers in cassettes are ready to be cleaned [2]. Junction formation by doping: The wafers have now been cleaned and are ready to be doped. This process will create an n-type layer on the c-Si. This n-type layer is created by applying a phosphorus coating to the silicon and then firing the wafers. The wafers are in what is called a diffusion coating furnace where the layer of phosphorus is deposited on to the wafers. The wafers are then moved to a different furnace where they are fired at a temperature roughly 800-1000 degrees Celsius. The firing process incorporates the phosphorus layer into the outer surface of the silicon wafer. Edge isolation: Edge isolation is a process in which the newly doped silicon wafers have the front and back sides isolated from each other. This is done by first stacking the wafers together and then loading them in to a plasma etching system. In this system the sides of the wafers will be plasma etched by using CF4 and O2. This process will remove the phosphorus dopant from the sides of the wafers thus separating the two n-type surfaces encompassing the silicon. Anti-reflection coating: One more step is needed before the wafers can begin the screen printing process and this is the application of an anti-reflection coating. This is a very important step because it is this coating that helps to reduce the amount of reflected photons, which in turn helps increase the efficiency of the solar cell.[4] For this step silicon nitride is used via a process called chemical vapor deposition process or CVD. During this process the chemicals are fed into the deposition chamber and they break down and adhere to the wafer. The actual chemical process for this is 3SiH4 + 4NH3 -> Si3N4 + 12H2. [2] Screen printing the rear contact: Now that the wafers have been doped, the front and back have been isolated from each other, and they have been coated with an anti-reflection coating they are now ready to receive the rear contacts. This is done through the screen printing process discussed earlier on in this paper. A screen carrying a metal paste is lowered over the top of the solar cell and then a squeegee pushes the paste through holes, transferring it to the cell in the desired pattern, this can be seen below in figure 4. This process is usually repeated twice for both the front and back sides of the solar cell, each of which both distributing different patterns to the solar cell. The first usually deposits an aluminum mask across the back of the cell to create the back surface field. [2] Figure 4: Squeegee pushing metallic ink across a screen. [2] The cell is then dried in an oven to remove all of the organic solvents and binders before the next screen takes place. The second screen on the back of the solar cell deposits a silver paste which is used for the contacts on the solar cell. After performing the second screen print on the back of the solar cell it is then placed in to an oven and fired at a higher temperature. During this process the metal and wafer are heated to a high enough temperature to destroy the n-layer allowing the metals printed on the cell to become in contact with the p-type silicon itself. Screen printing the front contact: Now that we have printed the back side of the solar cell it gets flipped over for the printing of the conductive fingers and the main busbars. This is the exact same process as explained earlier when printing the rear side of the solar cell except for the fact that the screens will have different designs to create the buss bar and finger system as mentioned. For the purpose of this paper we will be using a DuPont Solamet PV412 ink. The properties of this ink can be seen below in figure 5. Figure 5: Specification sheet for DuPont Solamet PV412 ink. [5] In between these two steps the wafers will be put into a drier around 200 degrees Celsius to dry the ink as said before on the back side. Once the second screen is transferred the wafer will again go back into an oven to fire the chosen metal paste into the silicon. A finished image of the front of a solar cell is shown in figure 6. http://www.ecn.nl/typo3temp/pics/db94f2dc2b.png Figure 6: Front of a finished solar cell [6] TECHNOLOGIES CHOSEN FOR THIS APPLICATION Why screen printing is used: Screen printing technology, where a metal-containing conductive paste is forced through the openings of a screen onto a wafer to form the circuits or contacts, is one of the best established and one of the most mature forms of solar cell fabrication technology. [7] First developed in the 1970s, screen-printing is currently the dominant form of fabrication of photovoltaic modules. [2] While screen printing does reduce the efficiency of a solar cell by 3.5-4% when comparing it to the best and more expensive methods, however, there are advantages to this fabrication method. [6] Some of the key advantages are the technologys simplicity in fabricating the solar cell, its cost-effectiveness and its ease of control. Why silicon is used: Currently, crystalline silicon is the dominant material used in the photovoltaic market, even though silicon does not have optimum material parameters. Specifically, its band gap is a little too low for an optimum solar cell and it has a low absorption coefficient. Due to silicons abundance and its prominence in the manufacturing industry, silicon still makes it difficult for other materials to compete in this market. [8] Why silver is used: Many factors come into play when deciding the material to be used in the solar cell. Some factors include the materials efficiency, its conductivity, its adhesion strength, as well as its cost effectiveness. Silver, being a great conductor of electricity, is used in the contact points. A well-formulated silver paste could have almost 50% higher conductivity compared to other pastes. [9] Silver also has great adhesion strength that meets the general costumer requirements. FINAL FABRICATION PROCESS DESCRIPTION Table 2 is a summary of the final design parameters for this solar cell. Table 2: Final Design Parameters Parameter Value Description Voltage at maximum power output Current density at max power output Maximum power output without losses Resistance per square of the emitter [10] Resistance per square of the ink [5] Resistivity of the ink Spacing between fingers Width of the fingers Height of the fingers Length of the fingers 80 Number of fingers Length of the bus bar Width of the bus bar Table 3 is a summary of the calculated losses of the solar cell associated with the grid and bus bars. Table 3: Calculated Power Losses Power losses due to shadowing Power losses in the emitter Power losses in the fingers Power losses in the bus bar Total power losses Percentage power losses The Final Fabrication After all of the multiple steps of screen printing are completed and the wafers have been fired at the appropriate temperatures for the correct amount of time, the solar cells are complete. Keep in mind that the stages of manufacturing where the wafers are fired must be done correctly to get the desired solar cell. If the temperature is to high this will cause the metals to melt together and make contact with others causing possible short circuit or giving the wafer improper properties. After this process is successfully completed, the cells can then have leads soldered to the back sides of them. This completes production of the physical solar cell and just leaves the process of soldering leads to the back side of the wafers which will allow the cells to be wired in series to achieve the desired output voltage. In conclusion the initial parameters included a minimum of 20.8% conversion efficiency and the power loss was to be kept under 8% by using commercially available inks and technology. We were able to achieve a conversion efficiency of 20.8% and we were able to reduce our power lost to 4.64% by screen printing our c-Si solar cells and also reducing the width while increasing the height of the fingers and busbars. REFERENCES [1] Reprinted from U.S. Department of Energy Photovoltaics Program. [Online]. Available: http://inventors.about.com/library/inventors/blsolar3.htm [Nov. 15, 2012] [2] Christiana Honsberg, Stuart Bowden. Photovoltaic Education Network [Online]. Available: http://www.pveducation.org/ [Nov. 1, 2012] . [3] Phoseon Technology Screen Printing. [Online]. Available: http://www.phoseon.com/applications/screen-printing.htm [Nov. 4, 2012] [4] Daniel Nilsen Wright. (2008, Jan, 16) Anti-reflection coatings for silicon solar cells [Online]. Available: http://www.sintef.no/uploadpages/24509/Daniel%20N%20Wright.pdf [Nov 3, 2012] [5] DuPont Solamet PV412 photovoltaic metallization [Online]. Available: http://www2.dupont.com/MCM/en_US/assets/downloads/prodinfo/Solamet_PV412.pdf [6] Jaap Hoornstra. Better printing delivers more solar power. ECN (Sep. 2010). [Online]. Available: http://www.ecn.nl/nl/nieuws/newsletter-en/2010/september-2010/two-stage- screen-printing-improves-solar-cell/ [Nov. 6, 2012] [7] Applied Materials. (April 2011). Screen Printing For Crystalline Silicon Solar Cells. [Online]. Available: http://www.appliedmaterials.com/sites/default/files/ [Nov. 15, 2012] [8] Jessika Toothman and Scott Aldous. How Solar Cells Work. [Online]. Availabe: http://science.howstuffworks.com/environmental/energy/solar-cell2.htm [Nov. 15, 2012] [9] Dr. Weiming Zhang. How Silver Paste Can Improve Silicon Solar Cell Performance/Cost Ratio. [Online]. Available: http://pvsilverpaste.com/media/webmedia_local/media/whitepapers/HowSilverPasteCanI mproveYourPerformance.pdf [Nov. 15, 2012] [10] Yelundur, V.; Nakayashiki, K.; Hilali, M.; Rohatgi, A.; , Implentation of a homogeneous high-sheet-resistance emitter in multicrystalline silicon solar cells, Photovoltaic Specialists Conference, 2005. Conference Record of the Thirty-first IEEE , vol., no., pp. 959- 962, 3-7 Jan. 2005 URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=arnumber=1488291 isnumber=31426

The Longest Day :: essays research papers

The Longest Day Few of God's miracles cause protests in the "scientific" community like the account of Joshua's long day - when God made the sun and moon to stand still. But science and modern technology have done more to verify this phenominal biblical fact than they have to refute it. Common sense would say it is impossible for such a major disruption to occur and not totally destroy the precise, perfect balance in the solar system. But given a God, who created the heavens and the earth, who established the rotation of the planets and stars to the fraction of a second, making the earth stop rotating for 24 hours is not such a difficult task. Yet, computer scientists in the space program and mathematicians - one a former professor at Yale University - have discovered that a whole day has been unaccountably added in time. The positions of the moon, sun, and planets have to be calculated precisely for all space shots to avoid problems in establishing the satellite's orbit. The orbit has to be calculated for the life of the satellite to avoid its running into something else in space. Using computers, scientists can tell the exact location of the planets and their moons for years into the future. By the same means, they have been able to backtrack and determine these specific locations in the past. It was during one such search that the extra day appeared. From various accounts of the incident, it appears that something "did not compute." The extra day was just there. There was no computer malfunction; there was no explanation for the interruption of normal time patterns. When this apparent error appeared and no explanation was forthcoming, one of the scientists related that he had studied in Sunday School about time standing still. A preposterous idea to scientists, but faced with no other explanation, they asked him to show them the story. In the story in the tenth chapter of the book of Joshua, Joshua had asked God to make the sun and moon stand still to enable Joshua to defeat his enemies. Joshua 10:13 says, "And the sun stood still, and the moon stayed, until the people had avenged themselves upon their enemies... So the sun stood still in the midst of heaven, and hasted not to go down about a whole day." There was the extra day that science couldn't account for. But scientists are more exact than that. The term, "about a whole day" was not close enough for them. They rechecked their computers, going back to the time when the story was

Filipino Smiles and Spirits Essay

Philippines, when we hear this word one thing pops out in the mind of most people in the World, Typhoon Haiyan, that barreled through most of Visayas, leaving a trail of devastation in its wake. Being the most powerful storm ever landed, how do Filipinos react into this kind of calamity? The fact that many storm have landed there all over the years. Can Filipinos still find a way to smile in those times? Many calamities have landed there in the Philippines, Including the Typhoon Haiyan, which is the most terrifying storm ever existed. It’s a tragedy to experience such a storm in a small country like theirs. We’ve seen high floods high as a second floor house, Children crying, Starving people begging for help, winds not like the zephyr outside your window but a wind like a tornado. If you’re in their situation, you’ll be given a Hobson’s choice by your own mind â€Å"You’ll eat that spoiled food on the ground or starve yourself to death† You have no option but to eat whatever food there is. People there had lousy- which means â€Å"abundantly supplied†- of stuffs, lousy of tragic memories, lousy of tears, lousy of floods, lousy of lousiness of many stuffs brought by the typhoon, but one thing we’re very lousy of are their humor and smiles. This is the best characteristics of Filipinos, even though darkness is taking over, they still find our little ray of sunshine and are happy for it, we’ll still find their sweet smiles. I found a lot of funny pictures in the internet, people dressed like a mermaid sitting on a rock, imitating little mermaid. Some are dressed like scuba divers, swimming in the ersatz swimming pool which is the flood in an Olympics way, edited a picture and titled it â€Å"The ConjuRAIN†, another picture showed two people lying on a waterbed, looking very relaxed as if they’re sun bathing. some even managed to take a picture of themselves smiling!. The Brightest smiles are owned by the Filipino people. Some countries may misunderstand the way we handle a situation like this but it’s just the way we are, we smile, we don’t lose hope. Just like the quote I’ve seen on the net â€Å"Baha ka lang, Pinoy kami! † means â€Å"You’re only a flood, We are Filipinos! â€Å". Filipino Spirit is Waterproof! We still find a sense of humor even in the worst day. They are Filipinos, these traits are in their blood. Being sad is the penultimate thing we feel whenever there’s calamity, and being happy and optimistic for what we still got is the last thing we feel. Having that trait is a blessing, show them that happiness is in your attitude. â€Å"There’s no reason crying in the rain, or flood for that matter. It worsens the situation, now another one is coming in and we need all the smile we can muster to drive away the gloomy days†That phrase can be a double meaning telling us to be strong in any problems and be happy for what you got. God really great for giving them such a trait.

Understanding the Difference of Operations

Understanding the Difference of Operations Understanding the Difference of Operations The achievements of an organization are the results of the combined effort of each individual, according to Vince Lombardi, the role that each individual takes in connection with the most important issues that their organizations are involved with compels a great role on how the whole group fares when it comes to the need of being able to develop further towards progress in the industry or the group of organizational types that they belong to. Yes, each individuals accountability to the role of the organization in the community is an important factor of consideration that every organizational member should practically give attention to. Issues on how organizations are mandated and managed according to the role that they are taking in the community has naturally made it harder for a lot of groups today to formulate operations that are sure to reach the standards that have been set for them to follow. Considerably though, organizational administrators were able to find ways and practical solutions that could better their operations and provide them the chance to properly consider the role that they are taking (Mulgan 2000, 555). Believably, these situations mandate not only the strength and the capability of the administrational body of the organization to lead or to manage the process, but also insist on the cooperation that every member of the group takes as their own personal responsibility. Certainly, both for-profit and nonprofit organizations face this ethical responsibility of providing their group a management that works and giving the community that right quality of services and products that they deserve. Different business organizations are based upon different foundations of mission and vision Practically, every business organization needs to have a reason for existence. No matter what that reason is, it serves as the organizations identification as it operates within the community that it aims to serve. Surely, this identification gives a proper sense of purpose as per suggested by the kind of organization that they are. Practically, the consideration on what particular kind of organization a group of people is practically committed to indicate the right kind of role that they are taking in the community. (Sinclair, 1995, 220) As for example, the for-profit organizations are based upon the aim of gaining the attention of the communities to be able to generate financial gains. On the other hand, non-profit groups provide service and volunteer operations that are dedicated to making it easier for the communities to get by (Dubnick, 1998, 68). Surely, it should not be pointed out that for-profit organizations are all for themselves, meaning they exist for personal reasons of gaining profit, instead, they just provide service or products to the community in an aim of getting the right kind of exchange for what they provide the community with. It could not be denied though that these organizations, whether for profit or nonprofit groups are accountable for their operations in connection with the process by which these operations are affecting the communities that they are living with. Basically, it could be noted that somehow, internal and external accountability of these organizations directly affect the kind of development that the said organizations are able to take in connection with the process by which they are able to relate to the needs and demands of the people within the communities that they are serving. Within the discussion that follows, an understanding of what internal and external accountability is all about and how profit and nonprofit organizations respond to this matter shall be presented. Seriously, it could be noticed that there are reasons by which organizations exist and this existence is based on noting the fact that the organization is aiming to operate for a reason. First to know is that of the difference of operations that for-profit organizations have in comparison with that of the nonprofit organizations which shall be discussed in the phase of presentation that follows. Understanding the Difference of Operations As mentioned earlier, for profit organizations are based on the idea of gaining more returns for the services or products that they release for public appreciation. This is the reason why for-profit organizations are also known as business organizations. It is through this identification of organizational process that the indication of organizational role is further assured. Basically, for profit organizations intend to balance loses or expenses that they have utilized for the manufacturing of products or processing services with the amount of income that they are to receive from the market. It is through this balancing process that they are able to receive back what they have lost and have ample amount of money to fund further operations in the future to have the organization continuously existing within the society. (Mulgan, 2000, 556) Besides this fact, for-profit organizations are also expected to face different measures of competition against other business groups that operate within the same industry as they do. Practically, it could then be realized that these organizations have to deal with more complicated approaches to operation just to be able to win the struggle of surviving in the field of modern commercial connections worldwide (Dykstra, 1939, 25). An example of this kind of organization is that of the IBM Company which basically have competition with Apple Computers and Compaq which are all international computer expert business operators that intend to offer the society with the best kinds of technological gadgets that are designed to make their life much easier and much enjoyable to live with. On the other hand, nonprofit organizations such as the Red Cross International Community of Volunteers rely on contributions and donations from supporters all around the globe. Unlike for profit organizations, these groups do not have a fixed capital that funds their organization for continuously operating for the good of the society that expects their help and assistance in times of emergency. Organizations such as Red Cross do not go through the complicated process of competing with other organizations that are in the same field of volunteering service operation. For example, at times, when there are huge situations such as wars and civil movements that affect the majority of the population of people in one country, Red Cross sends in some of its representatives to be able to deal with the situation and create a good sense out of the resources that they are able to use to give proper attention to the needs of the people needing their attention (Schedler, 1999, 332). At the same tim e, the UN may also send in some helping hand and in no way do these two groups undergo particular competition between each other. Perhaps, the only competition they have lies on the need of getting more volunteers and enticing more contributors for the development of the budget that they need to be able to fund further volunteering appointments. Yes, in many ways, nonprofit organizations help the governments a lot in assuring that the society gets the services that they need and get a hold of the elemental factors that are essential for their survival. As for example educational organizations may provide the service but only for those who are able to pay for the service. However, there are also some educational organizations that are nonprofit which particularly provide plain service to the learners. Hence, in connection to this, it could be noticed that the management by which the operations of these organizations are being given particular attention tom also differ in form as education institutions that are for profit intend to hire teachers at a base pay approach, while nonprofit educational institutions are more indulged in the chance of getting instructors and educational guides both through volunteerism and others that are instantiated through the shifting levels of salary for the services that they are to provide. Pra ctically, it could be observed that somehow, nonprofit organizations are practically accountable for providing the society what they deserve and what they need without actually asking for anything in return. Comprehending About Internal and External Accountability Separately, for profit organizations and nonprofit organizations have different roles and different responsibilities to the communities. At one point, the volunteerism that the nonprofit organizations depend upon makes it quite harder for them to complete operations in a much faster consideration that intends to make a difference in the society. Apparently only a few individuals today are making a good sense of what volunteerism is all about and how the process is actually able to make a great difference in the society. Only a few also realize the responsibility that they have on the others, giving them lesser chance to consider their purpose in life really is. Yes, volunteers are also accountable for the different operations of assistance that they are providing the community with. Particular process of operations ought to be followed and as volunteers following through these guidelines is practically essential in the role that they play for the communities. (Alvarado, 2000, 6) Understandably though, for profit organizations also have a promised oath to keep good track on how they serve the needs of the people. Besides simply serving as an aide for completing the economic cycle that funds the societys economic survival, business organizations are held responsible for assuring that their products are essentially kept practically usable and safe for the market that they are aiming to serve. Surely, the separation of the internal and the external accountability of the nonprofit from that of the for profit groups of organizations define the separation of their role in the communities that they are operating with, Indeed, with this differences identified clearly, it could be admitted that both types of organizations take their own stand in making the society a better place to live in with the perfect balance that needs to be given particular attention to. Making a good sense of what their role is affects the development of the communities that they are working with. (Dubnick, 1998, 68) Certainly, with this assurance of completed role, both types of organization intend to make a big difference in the ways by which the needs and the demands of the people in a community are practically given helpful response. Evaluation and Controls of Measuring and Assessing Organizational Governance The process by which organizations are able to control their operations affects so much the services and the products that they provide for the communitys population. Definitely, it could be mentioned though that these operations need to be guided by particular protocols that are intended to assist the volunteers as well as that of the business organizers in becoming much able to complete the roles that they have signed up for. How then shall the effectiveness of operations be assessed and measured? Through a series of evaluation that could be undergone within a specific span of time, operations of volunteerism and business approach for profit could be better investigated upon as to whether or not they are still able to adhere to the needs and the demands of the society who are supposed to be the receivers of their services and their products. (Dubnick, 1998, 81) Conclusion Considerably, from the discussion presented herein, the internal and the external accountability of organizations at present are practically making a good sense on how to develop the societies today. Surely, it could be mentioned that somehow, without the guidelines of completing these responsibilities, handling the most important roles that these organizations have towards the society may somewhat be much impossible to handle. Believably, as carefully mandated by the sense of accountability itself, organizations today have ethical responsibilities to their own people and of course to the society. Assisting every member of the organization to handle this responsibility is an essential factor of group existence in the community. Being able to respond to the needs of the society is one thing but being able to respond in respect to their values is another. Certainly, these organizations are held practically responsible of being able to make a good sense of their existence through maintaining a proper reputation that is able to withstand the challenges of being an organization set forth to serve the concerns of the society, For-profit organizations, although they have persona profit generating concerns, still have the responsibility of assuring that what they give the community is able to respond to the needs and values that the community itself gives particular importance to. Through making their employees and their staff of higher command accountable for their acts, they at the same time make every member of the organization responsible enough to make sure that the service they are giving to the organization would have a good effect on the community that they are aiming to serve. Nonprofit organizations on the other hand are accountable for the chance of being able to serve the needs of the people without asking for any particular pay. This does not mean though that since the members are not paid, they are now able to deal with matters that way that they want to. As public servants who aim to do good, volunteers of nonprofit organizations are expected to be held responsible of their acts whether or not they are paid; their responsibility is to the people. Yes, with or without money entailed in connection with the process of completing ones responsibility to the people, the process of being ethically outstanding in ones process of operation is every organizations best chance of gaining a fine reputation in the community.

Seat Belts Have Been Shown to Save Lives essays

Seat Belts Have Been Shown to Save Lives essays Wearing a seat belt every time you enter a car is an important factor in ensuring the safety of both yourself and other individuals. The consistent use of a seat belt can help to reduce the damaging effects of both a cars collision, and the collision of its human occupants. Seat belts are proven to save lives, and may be the most effective safety apparatus in modern vehicles. Stricter laws governing the use of seat belts may be an important way to increase seatbelt compliance. Encouragingly, seat belt use was at an all-time high in 2002, showing that many individuals were spurred into compliance. Despite this encouraging increase in the use of seat belts, it is clear that many Americans are still choosing not to buckle up. In doing so, they are endangering both their lives and the lives of their fellow passengers. The cost of not wearing a seatbelt can be high, both to yourself and the individuals around you. To understand the physical effects of a motor vehicle crash, it is important to understand the physical effects of such a crash. When a motor vehicle is involved in a crash, there are three types of collisions that have an important impact on human safety. They are: 1) the car's collision, 2) the human collision, and 3) the internal collision The car's collision is perhaps the most obvious of the three. This is the force that causes the car to buckle as it is forced to an abrupt stop. This force takes place over a tenth of a second. The front of the car absorbs some of the impact as the vehicle encounters another object. As a result of this cushioning, the passengers come to a softer stop than the rest of the car (National Safety Belt Coalition). The human collision is what many people correctly associate with human damage that occurs during an automobile crash. This occurs when human occupants hit some part of the vehicle. Occupants who are no...

Global Team Project (of one member only) (Brazil) Essay

Global Team Project (of one member only) (Brazil) - Essay Example It is actively supporting the development the local LED firms. The government subsidises and encourages production, facilitates distribution and consumption. In addition, the government sees to it that follow-up services are provided. Secondly, there are trade barriers in Brazil contrary to the norm in the America Market. The government’s regulations are to setting up a firm in Brazil are unfavourable to foreign corporations. (CalderoÃŒ n & United Nations, 2005). Coupled with the tax guidelines, the above make the barrier for the entry of foreign companies into local production chain and the local market. Establishment of  a manufacturing arm of MoGlow in Brazil is the best strategy to enter the Brazilian market. It would be seen as less threatening to the economy of Brazil and the living standards of the people. A company in Brazil will undoubtedly create employment opportunities for the nationals. The Brazilian Government is encouraging local production of ligyhti8ng products. The readily available raw materials would justify setting up manufacturing units in the country. Moreover, MoGlow would further tap into a The Brazil customers are office goers, students, the rural population and its urban population The U.S. population also provides customers for LED lighting lamps despite easily available electricity countrywide. A hardcover cardboard cover should be used in packaging the product. The brand name MoGlow and all the product details should be clearly shown on the cover. The decrease in the cost of electricity as the result of using this product should be indicated so that customers are attracted to the MoGlow product (Liu & Luo, 2011). Lighting companies such as GE, Sharp, Osram and Phillips are major competitors in the market. The presence of these manufacturing companies makes the market quite competitive. Alongside these multinationals, there exist

Biochemistry - How BSE Occurs at a Molecular Level Coursework

Biochemistry - How BSE Occurs at a Molecular Level - Coursework Example Toxicity: Large amounts of phenylalanine taken in the form of nutritional supplements elevate blood pressure. Symptoms such as headaches, heartburn and nausea may be experienced. In addition, the nervous system is usually affected by the toxicity of phenylalanine. Reactivity: Phenylalanine is a hydrophobic amino acid with an aromatic side chain. Therefore, it is fairly unreactive and mostly takes place in substitution reactions where it is interchanged with amino acids of a similar nature. Consequently, it plays a key role in substrate recognition rather than in protein function. Hydrogen bonds: Hydrogen atoms from the amine groups are pulled towards the electronegative carboxyl groups leading to sharing of electrons. The repetitive nature of such attractions within the protein structure confers stability. Van der Waals forces: Interactions among induced dipoles that form from the changes in charge density that occur in adjacent atoms that do not necessarily form a bond constitute attractive van der Waals forces. Repulsive forces, on the other hand, entail interactions between atoms that come close to each other but do not form dipoles. The huge numbers of such forces within the structure of proteins affect the stability of proteins. When certain proteins fail to fold in the required way, they begin to cluster and form aggregates. These aggregates contain certain polymeric structures such as beta sheets. In BSE, these aggregates are in the form of prions, which get into the brain and cause disease. Prions are proteinaceous infectious particles that comprise aggregates of misfolded proteins. Prions alter the structure of the brain by stimulating the formation of ‘holes’ in the brain, which ultimately give the brain a spongy architecture. Consequently, the nervous system is affected making the cow behave abnormally.  Ingestion of prions present in contaminated food causes them to be taken up into the body.  Ã‚  

Political Economy Assignment Example | Topics and Well Written Essays - 500 words

Political Economy - Assignment Example In the first game, player 1’s best response is in UL where he gets 3 pay offs. This is his best response since 3>2. At the same instance, player B has his best response of 4 playoffs (4>3 and 3>2).In the first game, player 1’s best response is in UL where he gets 3 pay offs. This is his best response since 3>2. At the same instance, player B has his best response of 4 playoffs (4>3 and 3>2).In the second game. At the same point (UL), both players have their best responses. For player 1, 3 playoffs (3>2) while for player 2, 4 playoffs (4>0).Nash equilibrium exists when player 1’s best response is the same as that of player 2. At (UL), both players have their best responses.The Condorcet loser in the elections is candidate C. The results indicates that his percentage preference in orderings (CAB and CBA) are 25% (24% +1%). This is the lowest since that of candidate B is 33%.a. In a plurality formula the candidates would get their votes as A (15000); B (15500); C (1 4500); and D (5000). This is the sum of all the votes where each of the candidates is preferred over the rest.   Candidate B would be favoured by the system and win with 15,500 votes. As shown by the figures, candidate A would be the runner-up with 15,000 votes.b. Runoff system.Total votes cast in the election are 50000. Therefore, none of the candidate makes it 40% of the votes (20,000). In a runoff, candidates A and B will be considered. Dropping candidate C would give 3500 votes to A, and 2500 to B as the second ranked.  Dropping candidate D will then give 1500 votes to A, and none to B in the same way.The system will therefore favour candidate A, who will be the winner with 15000+3500+ 1500 votes. A total of 20,000 votes.

Media and the Idea of Beauty Essay Example for Free

Media and the Idea of Beauty Essay Elizabeth Rosales Cultural Anthropology-A18: Yi,Zhou April 21, 2011 Response Paper: Killing Us Softly Who are we? Who am I? With the average American exposed to approximately 3,000 ads a day they all remind us of who we are not and who we should be. The images we are constantly bombarded with by the mass media don’t just sell products they â€Å"sell values, images, concepts of love, sex, and normativity†, standards to which we so often compare ourselves to. Ads reinforce gender binaries, all making a statement about what it means to be a woman in this culture of thinness stressing a particular importance on physical beauty. Jean Kilbourne’s film Killing Us Softly explores and exposes the detrimental effects of the objectification and dehumanization in the representation of women in the popular culture, specifically advertisements. With only less than five percent of women of the entire population that reflect the images of the women advertised, the majority of women are left to feel ashamed for not trying hard enough. Women’s bodies are increasingly subjected to strict scrutiny under a magnifying glass by our superficial culture, these actions bring forth and further feed the shame and embarrassment women associate with their bodies, their sexuality, their size, and their weight. Spending self-conscious days, weeks, months, and even years in front of a mirror and scale, inspecting our bodies in front of a mirror comparing ourselves to the images spread over magazine covers as women we are repeatedly reminded that our bodies are home to imperfections and there is always room for improvement whether that be through exercise, plastic surgery, dieting, or over the counter â€Å"beauty and health† products. Rosales 2 Is this self-improvement or self-destruction? Today, 1 in 5 women are likely to develop an eating disorder and cosmetic surgery is more popular than ever before. More and more women each day are going under the knife for breast enhancements losing all sensation in their breasts. Such procedures dehumanize and objectify women transforming them from â€Å"subjects to objects†, all because as women we are conditioned by the dominant culture to want to feel desirable and seek the approval of men. The breasts, therefore, become a source of pleasure for the men and not the women who undergo the procedure. These internalized feelings drive many to strive to obtain an unattainable beauty and live up to certain impossible expectations whether it’s consciously or not. We fail to recognize that most of the images we are exposed to are computer generated, they are not real women they have been photo shopped and manipulated to look like that and yet we continue to perpetuate these images as the standards for beauty. Much more, the standards that women are expected to live up to is a paradox of ideas, we are to be both â€Å"innocent and sexy, virgin and experienced† child/doll-like and sex objects simultaneously. Can that be any more absurd? Gender is a performance that the mass media is largely responsible for defining, if we are not thin or beautiful enough then we are not feminine enough. The oppression and misrepresentation of women is not limited to gender though, race plays an active role in the representation of women. Asian women for example, are depicted as docile and passive lovers, whereas black and Hispanic women are hyper sexualized and portrayed as exotic promiscuous â€Å"creatures† dressed in animal prints. The perfect ideal woman was manufactured and it’s time we recognize this, she is an illusion that doesn’t exist outside of caricature. Instead of altering our Rosales 3 bodies to fit those Barbie doll like measurements we need to start portraying the large diversity of women accurately and stop condemning those who are not thin enough, tall enough, light enough, as not being beautiful because they aren’t trying hard enough to fit those categories.

Aspects of Home Schooling Essay -- Education Home School Essays

Aspects of Home Schooling Do parents always know what is best for their child? When a parent says that they want to home school their child are they making the right decision? After all, parents are the ones that teach their children how to walk and talk. After all, they are the ones that are most interested in making sure that their child receives the best education, why shouldn’t they be the ones to teach their children? Being home schooled can have both a positive and negative effect on a child. One such reason why it would be beneficial for a child to be home schooled is to teach values and morals to the child. Children often learn things at a young age that they should not know; such as vulgar language or violence. Such bad behavior is present through out our society. After all it does not matter what school a child goes to, since children from all walks of life are present in the classroom. It is in the classroom where children hear things they should not be hearing. On the other hand if the child is being home schooled, then violence and vulgarities are things the parent does not have to worry about. A home environment also provides a child with less distraction and less peer pressure (HSLDA.com). Studies have also shown that students that are home schooled score higher on than their average peers. Once they get to college, children that are home schooled have higher grade point averages than the average college students (HSLDA.com). Another positive reason for home schooling is that the worry of a poor social life for the student does no longer have to be a concern for parents that might want to home school their children. Children that are home schooled can get involved in chu... ...needs? Is the parent capable of meeting their needs through home schooling? Either way, parents need to take their job seriously, because they have the ultimate responsibility of molding their children, and lessons taught at home are far more important than those learned in the classroom, especially in this world where there is no teacher – guarantee. Works Cited Geocities.com: Pro’s and Con’s of Educational Options (2000, February 20). Retrieved November 21, 2003, from http://www.geocities.com/Heartland/Garden/4555/ahrd99/caution.html Hoover-Stanford.com: Teacher Union Power is Awesomely Arrogant (2002, September). Retrieved November 24, 2003, from http://www-hoover.stanford.edu HSLDA.com: Home School Versus Home Room: The Education Debate (2003, November 13). Retrieved November 24, 2003, from http://www.hslda.org/Default.asp?bhcp=1

Breaking the Poverty Cycle

The poverty cycle is also termed as the behavior pattern of situations that cannot easily be altered and when referring to a given country it is called the â€Å"development trap† (Oster, Lake, & Gene, 1978) . This cycle is defined as the set of events or factors which once commenced, have no possibility of stopping unless there is intervention from external causing their subsequent generations to equally be impoverished. It is a phenomenon in which poor families end up being trapped in poverty for a period exceeding two and a half generations.The main cause for such families to be in this situation is the limitation to and lack of resources such as connections, financial capital, training and education. Under normal circumstances it is virtually impossible for any individual to break this cycle meaning that the poor people will for a long time remain poor. This is because many poverty cycles overlap and perpetuate other cycles causing any attempt to break this cycle to be unr ealistic. This situation is mostly found in shanty towns and inner city areas.Poverty refers to the state of material deprivation having either little or no goods, money and means of support. It is a condition in which an individual stays poor such that they experience deficiency their desired needs. Poverty is usually measured by the availability of infrastructure services, like sanitation and safe water. Poverty has been classified into two broad categories which are the situational poverty and generational poverty (Oster, Lake, & Gene, 1978). With this in mind this paper centers on what individuals are doing in order to break the cycle of poverty.This is with respect to the sociological imagination and the three major social theories of symbolic interaction, conflict and structural functionalism. In order to break the cycle of poverty, action needs to be put in place to deal with the root causes of poverty because the cycle of poverty is usually systemic in nature. This has been achieved via sociological imagination and social theories such as symbolic interaction, conflict together with structural functionalism as well.Sociological imagination entails a mind set which allows individuals to visualize the relationship that exists between events that occur in their personal lives and events within the society. Wright Mills adds to this definition by putting it as the means of breaking the poverty cycle through taking part in activities that are shaped by the situations that people find themselves in (Mills, 2000). Symbolic interactionism is one of the leading social psychological theories that focus on the ways through which meanings emerge from social interactions between places and individuals.Its prime concern has been to analyze the meanings of life events by way of intimate familiarity and close observational work. It equally gives strong emphasis on the role of symbols through language, gestures and signs as the core elements of these interactions (Reyn olds & Herman-Kinney, 2003). From the sociological perspective, the conflict theory involves perspectives that emphasize on political, social and material inequality of a given society. This Marxist-based social theory argues that groups and individuals of different social classes vary in amounts of non-material and material resources.The social conflict theory states that groups within a capitalist society interact destructively in such a way that there is little cooperation and no mutual benefit. According to Weber, the major class division is between those who do not and those who own the forces of production in the following classes, the propertied upper class, the property less white collar workers, the petty bourgeoisie and the manual working class (Agger, 1991). Structural functionalism is a theory which states that the function of a cultural trait, especially in an institution is the preservation and creation of social order.It addresses the social structure with respect to the function of the constituent elements such as the institutions, norms, customs and traditions. It also studies society as a structure with interrelated parts that work toward its proper functioning. In the society it is the positions that individuals occupy which are ranked, not the individuals (O'Neill, 1995). With respect to an Ontarion initiative to break the poverty cycle, studies on this initiative gave a head way to efforts that are being employed by people within the government, donor organizations, companies, individual families and communities to break the poverty cycle.According to the Ontario child support, education was used as the best way to break this cycle, through the enhancement of programs for at-risk kids in school. It offers support to more recreation programs for neighbor-hoods with high-needs. Further on education, this initiative provides support for parents in ensuring their children go to school particularly the low-income families (Ontario. ca, 2010). T he initiative also builds stronger communities because safety is considered one of the best ways to aid low-income families to enjoy better life.This has been done through investing in a fund which gives the local leaders funds for the establishment of community revitalization projects. It also avails summer jobs programs to give the children in priority neighbor-hoods valuable work experience. The initiative has also stabilized funding for the Provincial Rent Bank Program to aid persons facing possible eviction. The Ontario child support has also visualized a smarter government in such a way that they get the most for each dollar spent in support of low-income families.This is through a review of social assistance by increasing opportunity and removing barriers for people trying to move from social assistance into employment. In addition to this a Social Policy Institute focusing on evaluation and evidence-based social is being developed (Ontario. ca, 2010). Other efforts made by i ndividuals to break the poverty cycle includes self employment, where they get full benefits of the work they are doing in terms of reward which is mostly evident in the developing countries.People learn basic skills and end up being in a better position to support their families. Individuals have opened up to acquiring incomes that depend on the environment especially in Senegal and Dakar, where waste picker on the Mbeubeuss landfill site make a living by recycling materials. In Kampala, widows feed their families through urban gardening and rental income. Another initiative to break the poverty cycle is by The Sea to Sea partners who partake in self employment by teaching farmers new agriculture techniques (Dale, 2008).In an effort to break poverty cycles, policy-makers and companies ensure that the acquisition of assets such as land by poor communities is made easy through grants and other aids. Such assets are then developed to a level where they generate income and improve the lives of communities involved. Governments on the same note have resorted to promotion of equitable pay for all employees regardless of their social status through implementing policies. Other support agencies like the Sea to Sea works within communities and families to set up micro-credit loans to enable them acquire assets (Christian-Reformed-Church, 2010).Further efforts in breaking the poverty cycle include the cancellation or reduction of the national debt especially for the world's poorest countries so that the nations' economies of these countries experience some positive turn. Additionally, in a country like New York, according to an article by Frederique Krupa, a ten-year plan was started by the Koch Administration, intended to avail the New York City renovated apartment units because the city at the time was thriving and by so doing the city would be able to avoid the numerous lawsuits from powerful community groups.This is another way used to break the poverty cycle by cu rbing on oppression of the poor by the rich (Krupa, 1991). Social activists have also made an effort in breaking this cycle by focusing on anti-discrimination laws especially in the work place so as to increase the opportunities given to poor minorities and poverty elimination. It is common knowledge that over the years the poor have continued to work in the low paying but tiring jobs. There are minor means that have been employed by individual families such as cost sharing between husbands and wives in the sense that they both go out strive to earn income for the family.For wealthy individuals or any one who may have acquired capital, â€Å"provision of employment† by underpaying workers has enabled them break and stay away from poverty thus making more profits and continue to thrive on other people’s sweat. Some people strive to join politics so that they raise their status in society and earn more income by attaining high ranks within the government and society at l arge. If this cycle is left to persist, it may result to criminal activities like the selling of illegal drugs by the poor for survival. With these, there are numerous outcomes such as early death, addiction, breakup of families and shattered health.Other consequences include increase in slums within a country and stress causing very poor health levels. It is therefore important that everyone contributes to the breaking of the poverty cycle. References: Agger, B. (1991). A critical theory of public life: knowledge, discourse, and politics in an age of decline. New York: Routledge. Christian-Reformed-Church. (2010). What is the Cycle of Poverty? Retrieved March 6, 2010, from http://www. crcna. org/pages/sea_cycleofpoverty. cfm Dale, S. (2008, September). Breaking the Cycle of Urban Poverty. Retrieved March 6, 2010, from http://www. idrc. ca/en/ev-129440-201-1-DO_TOPIC.